Know About How to Build a Fish Tank
|
How to Properly Build Your Own Fish Tank
You can easily buy a fish tank from any pet shop store, but building on of your own will give a different sense of accomplishment. It is a very satisfying experience to plan, build and finish your own fish tank from nothing. Add the fact that you can create a fish tank according to your specification and desire measurements. You can to build up a fish tank that will fit in one specific space in your house. That's customized fish tank that you will surely be proud of.
Things you will need:
Glass for the tank body - 5 pieces for front, back, right side, left side and the bottom part
Sealant - non-toxic one hundred percent silicon
Sandpaper - silicon carbide
A bottle of Acetone
A roll of paper towels
A roll of duct tape
Washable marker
Preparations for the Fish Tank:
Measure the exact size of the fish tank you want to build; properly determine the glass thickness with the use of an aquarium thickness calculator for glass. Too thick fish tank will cost more while too thin fish tank and it will be prone to crack and may even burst up as soon as you put water in.
Order your 5 pieces of glass from a reputable glass cutter. The bottom glass is the base so you should measure it well; the 4 other glasses will be attached directly over your base glass.
Sand the edges of the glasses with the silicon sandpaper to file down any sharp edges.
Carefully lay out the glass pieces so you can easily identify which one goes where. Use the washable marker to help you distinguish the parts; do not forget to mark the inside and the outside part of each glass piece.
Instructions on Building your Fish Tank:
Prepare your pre-cut duct tapes; about 20 of 5 inches long pieces
Place the base glass on the work table with the inside part face up. Put a small amount acetone on a paper towel and start cleaning the edges of the glass all around.
Stick 8 duct tape pieces below the fish tank; 4 under the tank and the other 4 on the outside. Make sure the sticky part is facing up. Place two duct tape strips on every side of the base glass.
Put sealant on one side of the length of each side glasses before attaching them on the bottom glass. Carefully press each glass firmly and secure each glass side with duct tape pieces.
Secure every piece of glass by running small amount of sealant on all inside edges. Wait for 24 hours for the sealant to properly dry out.
Once dry, try filing the tank with water then check for any leaks. Let the water stay for another 24 hours; if there will be no leaks, then your own fish tank is ready for the fishes.
|
|
Author Resource:-
Sharon M Brooks is an experienced writer and researcher on topics like how to build a fish tank and how to build a fish tank.
|
By :
Sharon M Brooks
Submitted
2011-10-09 00:04:51 |
Article From Article Mayhem
 Ezine ready view |
|
|
|
Related Articles
|
|
|
![[Valid RSS feed]](http://www.articlemayhem.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed![[Valid RSS feed]](http://www.articlemayhem.com/images/rss.jpg "XML Feed For RSS")