Use Parker O-Rings For Ultimate Sealing Solutions
|
Parker O-rings go a long way in making sealing for all industry areas a breeze. In fact: they act as a seal against a variety of high temperatures: cryogenic conditions and chemicals.
They are doughnut shaped and are generally molded from an elastometer compounds like synthetic or natural rubber. Among its various application areas are mechanical setups where they prevent flow of air and fluid through sealing. They are usually fixed to cavities or: grooves to achieve all kinds of resolutions in sealing as high as 1000 PSI. In fact: these O-Rings can endure temperatures ranging from -200 degrees Celsius to +250+ degrees Celsius.
Apart from the standard sizes: parker o-rings also come in different customized varieties as per their inner diameter: its cross-section diameter: material composition and hardness. And the only factor that is responsible for this is the compression which determines the O-Ring cross section diameter. It is to be mentioned here that the inner diameter of O-Ring should be similar to the inner diameter of the groove: so that it can get stretch and stick to the groove.
The parker o-rings cross-section diameter must be smaller than groove width to allow the radial expansion of the O-Ring when it is pressed in the cavity. These tools are used in different industries like automotive: defense and semi-conductor to ensure safe operations and reliability. Whatever your areas of application make sure that the O-Rings are made are as per SAE AS568A standards. However: before ordering parker O-rings for your specific need always consider factors chemical behavior: temperature and pressure to get durable O-Rings for maximal productivity.
There are many advantages of using parker o-rings in multiple industry sectors. They are user friendly and require no smearing or re tightening: once they are installed. Unlike piston seals they require very little room and very light weight. Additionally: they can be recycled and reused if maintained properly; hence they are cost effective sealing solutions even for high performance applications. They are also different from hydraulic seals that are made from a variety of materials such as polyurethane: rubber or PTFE.
To get the best parker o-rings it is recommended that you try the online destination as most of the suppliers that have online presence are good at designing and production of superior grade O-Rings and gaskets. You can also find teflon backup rings on the internet. From the beginning to the final stage of production these suppliers ensure you lend supreme material consistency to your customer needs.
|
|
Author Resource:-
From last few years I have written many articles on industrial products like parker o-rings, hydraulic seals, piston seals, pneumatic seals, lathe cut o-rings and teflon backup rings.
|
By :
Scott Mathews
Submitted
2010-10-25 01:01:55 |
Article From Article Mayhem
 Ezine ready view |
|
|
|
Related Articles
|
|
|
![[Valid RSS feed]](http://www.articlemayhem.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed![[Valid RSS feed]](http://www.articlemayhem.com/images/rss.jpg "XML Feed For RSS")